Training schedule

This certification covers Service Levels 1, 2 and 3 for the 900CX (Orion®), covering all CX models including the 918CX, 920CX and 922CX. On successful completion, you will be fully certified to service 900CX equipment on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the 900DX (Orion®), covering DX models 922DX, 927DX and the 928DX. On successful completion, you will be fully certified to service 900DX equipment on behalf of Rapiscan Systems for 12 months. This course does not include certification on the 930DX or 935DX.

This certification covers Service Levels 1, 2 and 3 for the BPI 600 ATU. On successful completion, you will be fully certified to service the 600 ATU product line on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the BPI 600 AT2. On successful completion, you will be fully certified to service the 600 AT2 product line on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the BPI 600 XRh. On successful completion, you will be fully certified to service the 600 XRh product line on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the Gemini® product range. On successful completion, you will be fully certified to service all Gemini® products on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the VOTI product line. On successful completion, you will be fully certified to service VOTI equipment on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the BPI 600 XR/XRW. On successful completion, you will be fully certified to service the 600 XR/XRW product line on behalf of Rapiscan Systems for 12 months.

This certification covers Service Level 1 for the Rapiscan Systems Orion® DX Series. On successful completion, you will be certified in Daily and Weekly Preventative Maintenance on behalf of Rapiscan Systems for 12 months.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training

This certification covers Service Level 1 for the Rapiscan Systems 600 Series. On successful completion, you will be certified in Daily and Weekly Preventative Maintenance on behalf of Rapiscan Systems for 12 months.

This training session is designed to support the FedEx Ground software upgrade effort and to expose the technicians to both the components required for the update as well as the process of upgrading each component. This session will also cover some basic Linux processes and commands that will be useful for the upgrade.

This 1-Day course provides students with the skills and knowledge required to successfully operate the Rapiscan Orion® 900CX Series, providing them with the skills required as an Operator to effectively use the 900CX Series product line.

This combined certification covers Service Levels 1, 2 and 3 for the 900CX and 900DX Orion® equipment. The models covered in the training are: 918CX, 920CX, 922CX 920DX, 926DX, 927DX, 928DX On successful completion, you will be fully certified to service 900CX and 900DX Orion® equipment on behalf of Rapiscan for 12 months. This course does not include certification on the 930DX or 935DX.

The first day consists of the classroom version of the 900DX Series Operator Certification course, which ensures that your trainers learn the full aspects of how to successfully activate and operate the 900DX series, whilst enhancing their image interpretation skills. The final two days concentrate on the Train-the Trainer aspect, certifying students to official Rapiscan standards.

This certification covers Service Levels 1, 2 and 3 for the RTT®110. On successful completion, you will be fully certified to service the RTT®110 on behalf of Rapiscan Systems for 12 months

This certification covers Service Level 1 for the RTT®110. On successful completion, you will be certified in Daily and Weekly Preventative Maintenance on behalf of Rapiscan Systems for 12 months.

This 4-day Train the Trainer certification prepares trainers and instructors to provide RTTVis Operator and Supervisor training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators/supervisors on behalf of the Learning Academy for 12 months, specifically on RTTVis and TMAS.

This 1-day course for operational screeners provides attendees with the skills required to use the ADS screening equipment workstation image analysis tools for the RTT®110.

Rapiscan Systems Learning Academy offers follow-on training from our operator training programs for those who supervise teams of operators, screeners or users of Rapiscan Systems equipment.

This 2-day Train the Trainer Re-Certification enables Trainers and Instructors to continue to deliver RTTVis Operator and Supervisor training on site to colleagues of the same company. A Trainer who successfully completes this course will be authorized to deliver Rapiscan approved RTTVis Operator and Supervisor training for 12 months. The RTTVis Operator and Supervisor certifications are the optimal approach for training new starters and ensuring all training needs are met.

This 2-day Train the Trainer Re-certification enables trainers and instructors to provide Itemiser® 4DN Operator training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators on behalf of the Learning Academy for 12 months, specifically on the Itemiser® 4DN.

This 3-day Train the Trainer certification prepares trainers and instructors to provide Itemiser® 5X Operator training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators on behalf of the Learning Academy for 12 months, specifically on the Itemiser® 5X.

This 2-day Train the Trainer Re-certification enables trainers and instructors to provide Itemiser® 3e Operator training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators on behalf of the Learning Academy for 12 months, specifically on the Itemiser® 5X.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

This certification covers the Itemiser® 4DX and Itemiser® 4DN. This maintenance certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the 4DX and 4DN on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in separate courses/certifications.

This newly updated maintenance certification covers the Itemiser® 5X. This certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the 5X on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in a separate certification.

This certification covers the Itemiser® 3e. This maintenance certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the Itemiser® 3e on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in a separate certification.

This certification covers the Itemiser® DX. This maintenance certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the Itemiser® DX on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in a separate certification.

This certification covers the MobileTrace® & Hardened MobileTrace® products. This maintenance certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the MobileTrace® & Hardened MobileTrace® on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in a separate certification.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

This 1-day comprehensive course provides students with the skills and knowledge required to supervise operators of the Rapiscan Systems 920CT, using the Field Data Reporting System, populating reports and administering the advanced software features.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

This certification covers Service Level 1 for the Rapiscan Systems Tray Return System (TRS). On successful completion, you will be certified in Daily and Weekly Preventative Maintenance on behalf of Rapiscan Systems for 12 months.

This 3-day Train the Trainer certification prepares trainers and instructors to provide 920CT Operator training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators/supervisors on behalf of the Learning Academy for 12 months, specifically on the 920CT.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

This certification covers Service Levels 1, 2 and 3 for the Rapiscan Systems Tray Return System (TRS). On successful completion, you will be fully certified to service the TRS on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the 920CT. On successful completion, you will be fully certified to service the 920CT on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1 and 2 for the 920CT. On successful completion, you will be certified in Preventative Maintenance on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the Orion® 935DX. On successful completion, you will be fully certified to service the 953DX on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the 600 Series AirCargo (632, 636 and 638). On successful completion, you will be fully certified to service the 600 Series AirCargo on behalf of Rapiscan Systems for 12 months. Note - this does not include the 638DV 300KV. This is a separate course.

This certification covers Service Levels 1, 2 and 3 for the 638 320KV AirCargo equipment. On successful completion, you will be fully certified to service the 638 320KV on behalf of Rapiscan Systems for 12 months. Note - this does not include the generic AirCargo Series. This is a separate course. This course specializes in the 320KV Generator.

Our flagship five-day course is designed to provide students with the skills required to perform Advanced Threat Recognition, giving them the ability to detect a wider range of threat items through better utilization of the equipment available, whilst becoming more proficient in dealing with threat detection and escalation processes.

This Department for Transport (DfT) training course is mandatory for any person who has general responsibility, at national or local level, in ensuring the implementation, maintenance, and legal provisions of a Security programme, and operational compliance. This could include managers employed within an airport, airline, cargo, in-flight supplies, or other aviation stakeholder function.

This Department for Transport (DfT) training course is mandatory for any person who has general responsibility, at national or local level, in ensuring the implementation, maintenance, and legal provisions of a Security programme, and operational compliance. This could include managers employed within an airport, airline, cargo, in-flight supplies, or other aviation stakeholder function.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

This certification covers Service Levels 1-3 for the Metor® 6 Series. On successful completion, you will be certified in Daily, Weekly, Monthly and Quarterly Maintenance on behalf of Rapiscan Systems for 12 months. This course will include the Metor® 28e (if applicable to your region).

This certification covers Service Levels 1-3 for the Metor® 9M. On successful completion, you will be certified in Daily, Weekly, Monthly and Quarterly Maintenance on behalf of Rapiscan Systems for 12 months.

Part one of the Learning Academy’s first line manager training provides team leaders and new managers with some invaluable techniques for getting the best out of their team members.

Part two of the Learning Academy’s first line manager training provides team leaders and managers with some further techniques for getting the best out of their team members once the performance management basics are in place.

This course is designed to help managers develop the knowledge and skills to create and maintain a high performing team. We will utilise the Belbin Team Roles model, and self perception inventory, to raise self awareness of participant’s preferred team role within a team, as well as the other behavioural characteristics that need to be present to achieve a high performing team. Participants will also learn techniques that will engage and inspire their teams to achieve a higher level of team performance.

Managing organisational and cultural change for managers, provides managers with clear insights on how to effectively motivate people through corporate culture or organisational change.

This Learning Academy course develops managers to improve innovations, and develop creative thinking in the workplace. This is an inspirational one-day creativity and innovation training course to develop creative thinking – for managers and work teams.

Learn effective techniques to manage employee performance with this one-day Learning Academy course! The course provides comprehensive performance management training, covering practical techniques and processes for managing employee and team performance.

Develop key leadership skills to get the best from your team! This course helps leaders identify their focus and style of leadership, identifying where and how it adds value to the business and the team/s they lead. This is a great environment to consider how they can extend their leadership influence to create maximum business results.