Tray Return System (TRS) Advanced Maintenance Certification

This certification covers Service Levels 1, 2 and 3 for the Rapiscan Systems Tray Return System (TRS). On successful completion, you will be fully certified to service the TRS on behalf of Rapiscan Systems for 12 months.

3 days, 9:00 AM – 5:00 PM BST

Salfords

Salfords, UK
  • X Ray House, 8 Bonehurst Rd
    Redhill, Salfords RH1 5GG
    United Kingdom
Presented by Nick Ringwood
  • Free
Sold out
Confirmed

Description

Covered in the course:

  • Level 1 and Level 2 Maintenance 
  • Perform a full Preventive Maintenance PM
  • Panel removal and refitment: Remove Blue mid panels, silver kick panels, and top panels. Replace it once the inspection is complete.
  • Check the condition of roller drive bands and replace them if necessary.
  • Check the condition of Tray Return Powered Rollers and ensure they are secure.
  • Check the condition of top-level Powered Rollers and ensure they are secure.
  • Check all Node covers are securely fastened.
  • Check sensors are clean, free of debris and fitted securely.
  • Check wiring is securely fastened.
  • Check Gravity Roller bearings.
  • Check all panels fastenings are present and in working condition.
  • Check condition of Conveyor belts (spacing, decision and reject belts)
  • Check Linear Actuator on Diverter
  • Check Gravity Brake is active and adjusted correctly.
  • Remove dust, dirt & debris from in and around all moving parts (including Tray Return Rollers Scrolls, Gearbox and Gearbox Shafts.
  • Check alignment of Scrolls and adjust if necessary.
  • Check Reclaimer gear box and shafts.
  • Check tray-stop mechanism condition.
  • Check RFID Heads and cables.
  • Check 2m Parallel Divestment End of line, start of line and spacing modules: Change Return Track Drive Bands or Top Track Dive Bands if needed.
  • Check 2m Spacing Conveyor Mitre Return: Change Grip Rings if needed.
  • FRU Identified Parts
  • Belt replacement/tracking
  • Adding Accessories/Options
  • CT Integration