Tray Return System (TRS) Advanced Maintenance Certification

This certification covers Service Levels 1, 2 and 3 for the Rapiscan Systems Tray Return System (TRS). On successful completion, you will be fully certified to service the TRS on behalf of Rapiscan Systems for 12 months.

Description

Covered in the course:

  • Level 1 and Level 2 Maintenance 
  • Perform a full Preventive Maintenance PM
  • Panel removal and refitment: Remove Blue mid panels, silver kick panels, and top panels. Replace it once the inspection is complete.
  • Check the condition of roller drive bands and replace them if necessary.
  • Check the condition of Tray Return Powered Rollers and ensure they are secure.
  • Check the condition of top-level Powered Rollers and ensure they are secure.
  • Check all Node covers are securely fastened.
  • Check sensors are clean, free of debris and fitted securely.
  • Check wiring is securely fastened.
  • Check Gravity Roller bearings.
  • Check all panels fastenings are present and in working condition.
  • Check condition of Conveyor belts (spacing, decision and reject belts)
  • Check Linear Actuator on Diverter
  • Check Gravity Brake is active and adjusted correctly.
  • Remove dust, dirt & debris from in and around all moving parts (including Tray Return Rollers Scrolls, Gearbox and Gearbox Shafts.
  • Check alignment of Scrolls and adjust if necessary.
  • Check Reclaimer gear box and shafts.
  • Check tray-stop mechanism condition.
  • Check RFID Heads and cables.
  • Check 2m Parallel Divestment End of line, start of line and spacing modules: Change Return Track Drive Bands or Top Track Dive Bands if needed.
  • Check 2m Spacing Conveyor Mitre Return: Change Grip Rings if needed.
  • FRU Identified Parts
  • Belt replacement/tracking
  • Adding Accessories/Options
  • CT Integration