Training schedule

This certification covers Service Levels 1, 2 and 3 for the 900CX (Orion®), covering all CX models including the 918CX, 920CX and 922CX. On successful completion, you will be fully certified to service 900CX equipment on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the 900DX (Orion®), covering DX models 922DX, 927DX and the 928DX. On successful completion, you will be fully certified to service 900DX equipment on behalf of Rapiscan Systems for 12 months. This course does not include certification on the 930DX or 935DX.

This certification covers Service Levels 1, 2 and 3 for the BPI 600 ATU. On successful completion, you will be fully certified to service the 600 ATU product line on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the BPI 600 AT2. On successful completion, you will be fully certified to service the 600 AT2 product line on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the BPI 600 XRh. On successful completion, you will be fully certified to service the 600 XRh product line on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the Gemini® product range. On successful completion, you will be fully certified to service all Gemini® products on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the VOTI product line. On successful completion, you will be fully certified to service VOTI equipment on behalf of Rapiscan Systems for 12 months.

This certification covers Service Levels 1, 2 and 3 for the BPI 600 XR/XRW. On successful completion, you will be fully certified to service the 600 XR/XRW product line on behalf of Rapiscan Systems for 12 months.

This certification covers Service Level 1 for the Rapiscan Systems Orion® DX Series. On successful completion, you will be certified in Daily and Weekly Preventative Maintenance on behalf of Rapiscan Systems for 12 months.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training

This certification covers Service Level 1 for the Rapiscan Systems 600 Series. On successful completion, you will be certified in Daily and Weekly Preventative Maintenance on behalf of Rapiscan Systems for 12 months.

This 1-Day course provides students with the skills and knowledge required to successfully operate the Rapiscan Orion® 900CX Series, providing them with the skills required as an Operator to effectively use the 900CX Series product line.

This combined certification covers Service Levels 1, 2 and 3 for the 900CX and 900DX Orion® equipment. The models covered in the training are: 918CX, 920CX, 922CX 920DX, 926DX, 927DX, 928DX On successful completion, you will be fully certified to service 900CX and 900DX Orion® equipment on behalf of Rapiscan for 12 months. This course does not include certification on the 930DX or 935DX.

The first day consists of the classroom version of the 900DX Series Operator Certification course, which ensures that your trainers learn the full aspects of how to successfully activate and operate the 900DX series, whilst enhancing their image interpretation skills. The final two days concentrate on the Train-the Trainer aspect, certifying students to official Rapiscan standards.

This certification covers Service Levels 1,2 and 3 for the Orion® 930DX (Van). On successful completion, you will be fully certified to service the 930DX on behalf of Rapiscan for 12 months. Note, that this course can be used as a one-day addition to our Orion® 900DX Advanced Maintenance Certification if you are already certified on this product line.

This immersive 4-day training program is designed to equip participants with a comprehensive understanding of the operator role for the Rapiscan 935DX and 927DX systems. Through a blend of hands-on practice, guided instruction, and peer collaboration, students will build the technical proficiency and operational confidence required to excel in real-world screening environments. By the end of the course, students will not only be certified operators but also capable trainers on the product.

This immersive 3-day training program is designed to equip participants with a comprehensive understanding of the operator role for the Rapiscan 600 Series equipment. Through a blend of hands-on practice, guided instruction, and peer collaboration, students will build the technical proficiency and operational confidence required to excel in real-world screening environments. By the end of the course, students will not only be certified operators but also capable trainers on the 600 series product line.

This is a knowledge-based course only, with no practical assessment component or formal certification.

This 1-Day course provides students with the skills and knowledge required to successfully operate the Rapiscan 600 Series, providing them with the skills required as an Operator to effectively use the 600 Series product line.

This certification covers Service Level 1 for the RTT®110. On successful completion, you will be certified in Daily and Weekly Preventative Maintenance on behalf of Rapiscan Systems for 12 months.

This 4-day Train the Trainer certification prepares trainers and instructors to provide RTTVis Operator and Supervisor training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators/supervisors on behalf of the Learning Academy for 12 months, specifically on RTTVis and TMAS.

This 1-day course for operational screeners provides attendees with the skills required to use the ADS screening equipment workstation image analysis tools for the RTT®110.

Rapiscan Systems Learning Academy offers follow-on training from our operator training programs for those who supervise teams of operators, screeners or users of Rapiscan Systems equipment.

The RTT110 Matrix System Overview course provides learners with knowledge of the Matrix architecture, EverRun fault-tolerant software, hardware components, network pathways, and types of Matrix configurations. The course equips learners with the skills required to understand system design, operation and maintenance to support RTT110 operations.

This training course provides students with the knowledge required to competently use the RESCO application on their work device. This course can be delivered remotely via video call or in person.

MINI Z Operator training is a 1 day course that is designed to provide users with an overview & equipment familiarization. It will include classroom & hands on training.

This certification covers the Itemiser® 4DX and covers Service Levels 1, 2 and 3. On successful completion, you will be fully certified to service the 4DX on behalf of Rapiscan for 12 months. This course does not include certification on the other Trace products; these are covered in separate courses/certifications.

This is a service specific course focusing on replacing the Itemiser 5X Detector Head

This 2-day Train the Trainer Re-certification enables trainers and instructors to provide Itemiser® 4DN Operator training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators on behalf of the Learning Academy for 12 months, specifically on the Itemiser® 4DN.

This 3-day Train the Trainer certification prepares trainers and instructors to provide Itemiser® 5X Operator training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators on behalf of the Learning Academy for 12 months, specifically on the Itemiser® 5X.

This 2-day Train the Trainer Re-certification enables trainers and instructors to provide Itemiser® 3e Operator training on site. This is the optimal approach for training new starters and ensuring all training needs are met. A trainer who successfully completes this course will be authorized to train operators on behalf of the Learning Academy for 12 months, specifically on the Itemiser® 5X.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

Our operator training is designed for new users and to refresh the knowledge of current users. Each of our operator courses are designed with blended learning in mind – providing students with theory-based learning and practical sessions using Rapiscan Systems equipment. All operator courses are formally assessed to ensure all students are competent to effectively use your equipment. Students are provided with official certification and certificates, on successful completion of training.

This certification covers the Itemiser® 4DX and Itemiser® 4DN. This maintenance certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the 4DX and 4DN on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in separate courses/certifications.

This newly updated maintenance certification covers the Itemiser® 5X. This certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the 5X on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in a separate certification.

This certification covers the Itemiser® 3e. This maintenance certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the Itemiser® 3e on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in a separate certification.

This certification covers the Itemiser® DX. This maintenance certification covers Service Levels 1, 2 and 3 for these models. On successful completion, you will be fully certified to service the Itemiser® DX on behalf of Rapiscan Systems for 12 months. This course does not include certification on the other Trace products, these are covered in a separate certification.